塑料在线 | 塑料机械
产品详情属性参数
遮板钢模具(边经理：18831266588 微信18803129528）模具的成型工艺主要有两种，一种是现浇，这种工艺指的是现将模具在特定的地方加以固定，然后在模具与墙体间注入适量的混凝土，待其成型，取其模具。另一种是预制模具。这种工艺，通常是先将模具制作而成，然后在模具内侧注入适量混凝土，等待成型，拆掉模具。预制遮板模具的成型工艺就是第二种成型工艺。这样生产出来的遮板更为细致，稳定性较高，不易变形，更符合市场的需求。如何让客户正确使用遮板钢模具是我们厂家的责任，关于钢模具漏浆的问题大大影响了遮板钢模具的发展，造成漏浆的最主要的原因是焊接的时候没能做到每个面的百分百的衔接，工人的粗心大意，其次是螺栓卡扣安装的不稳固。还有就是钢模具生锈的问题，钢模具虽然比塑料模具抗摔，抗压也抗腐蚀，但是最脆弱的一点就是怕生锈，一旦生锈再生产水泥预制件尺寸就会不规整，表面效果也会大打折扣，所以在使用完模具以后首先将模具里的石灰用扫帚清扫干净，在用清水冲洗干净，然后放置在干燥的地方晾干储存。正确的使用和保养模具会节省大量的成本。
There are two main types of molding techniques for the moulds of sheet steel(edge manager: 18831266588 WeChat 18803129528). One is cast-in-situ. This process refers to the mold being fixed in a specific place, and then the mold and the wall are injected with an appropriate amount of concrete. When it is formed, take its mold. The other is prefabricated molds. This process is usually made of molds first, and then injected an appropriate amount of concrete into the inside of the molds, waiting for the molds to be formed and removed. The molding process of the prefabricated cover mould is the second molding process. In this way, the cover plate produced is more detailed, has higher stability, is not easy to deform, and is more in line with the needs of the market. It is the responsibility of our factory to let the customers use the sheet steel mould correctly. The problem about the leakage slurry of the sheet steel mold greatly affects the development of the sheet steel mold. The main reason for the leakage slurry is that the welding failed to achieve 100 % of each surface. The connection, The worker's carelessness is followed by the unstable installation of bolt clasps. There is also the problem of rust in steel molds. Although steel molds are more resistant than plastic molds, they are also resistant to corrosion. However, the most vulnerable point is to be afraid of rust. once rust is produced, the size of cement prefabricated parts will be irregular and the surface effect will be greatly reduced. Therefore, after using the mold, the lime in the mold is first cleaned with a broom, washed with water, and then placed in a dry place to dry and store. Proper use and maintenance of the mold will save a lot of costs.